Short video clips designed to complement teaching about the civics, the Constitution, and social studies. See Consitutional Foundation clips onHow Electorial Votes are Counted, SCOTUS' lemon test, Legal Protections for Gun Manufacturers, Internal Fragmentation of Democracies & more. Most topics cover current relevance. To save to your own classroom, you need to create a login (free). Includes many intreviews with historians, making this ideal for history classsrooms.

In this lesson students explore the benefits (and potential security concerns) associated with routing traffic across the Internet. Building on their introduction to IP addresses in the previous lesson, students use a version of the Internet Simulator that allows messages to be sent only to an intended recipient, as indicated by the IP address. The Internet Simulator also allows students to examine the traffic that goes through all of the (simulated) routers on the network. They will discover that messages go through many different routers, may not always take the same path to reach the final destination, and that the routers (and their owners) can *see all of this traffic*!

In this and the subsequent lesson, we consider some of the strategies used to construct networks and find paths for data in them. While this has a connection to ideas about the Internet, the focus of these lessons is on algorithms, formal techniques, and processes for solving problems. Students will explore and solve the Minimum Spanning Tree (MST) problem, first, in an unplugged fashion on paper. The real challenge is not in solving a particular instance of the minimum spanning tree, but to develop an algorithm, a clear series of steps, that if followed properly, will solve any instance of the problem. There is a possible misconception to look out for: the MST has a definite, verifiable optimal solution, as opposed to the Text Compression problem (from Unit 1), which does not.

In this lesson students will explore the Single Source Shortest Path problem, by solving the problem with pencil and paper first, then by following a famous algorithm that solves the shortest path problem known as Dijkstra’s Algorithm. Even though this is an algorithms detour, there is a strong connection in this lesson to routing algorithms used on the Internet. This lesson also introduces ideas about how we analyze algorithms: looking for correctness, efficiency and running time. As foreshadowing: in the next lesson students will act out another distributed shortest path algorithm used by routers to learn about the Internet dynamically.

This lesson is the last of the algorithm series. Building off of the previous lesson about shortest path algorithms, the activity in this lesson shows how routers learn about the rest of the Internet in order to route traffic so it takes the shortest path. In the previous lessons, students use the Internet Simulator to send packets to other students through simulated routers. The path that the packet follows, and how the router knows where to send it, however, has been largely untouched. Today, students simulate the process of a router joining a network and generating a router table that would allow them to send packets to anyone else in their network as efficiently as possible. They then reflect on the process by comparing the similarities between the SSSP problem and the process the used today, and how it facilitates the structure of the Internet.

In this lesson student develop a protocol for reliably sending a message over an unreliable internet. The Internet Simulator has been setup for this lesson to restrict messages to no more than 8 characters each, and messages get dropped messages with some probability on every hop.

Students are given time to experiment with the Internet Simulator and develop their own protocol, possibly testing or demonstrating their protocol to their peers. At the conclusion of the lesson, students watch a short video explaining how these challenges are addressed in the real world with [v TCP] - the Transmission Control Protocol.

The core idea of this lesson occurs in the unplugged activity that kicks off the lesson, in which students try to keep track of IP addresses that had been randomly assigned to each student in the class, while at the same time the teacher occasionally changes students' addresses. This leads to identifying the need for an authoritative system for name-to-address mappings, known as the Domain Name System or [v DNS].

Students then briefly experiment with a DNS protocol in the Internet Simulator. The activity is similar, in that students will have to grapple with IP addresses changing in real time and use the built in DNS protocol to resolve the issues.

The lesson ends with students doing some rapid research about DNS and some of its vulnerabilities, particularly what are known as Denial of Service Attacks.

In this lesson students are introduced to another high-level protocol of the Internet, [v HTTP]. The lesson begins with a review of the layers of the Internet covered thus far, before transitioning to a video covering high-level protocols of the Internet, most notably HTTP. Students will investigate HTTP traffic generated within their own browser by accessing the browser’s developer tools and visiting a variety of websites. A handout summarizing the structure of HTTP is provided to help students understand the components of the HTTP requests and responses they will observe. The lesson concludes with students sharing their findings with their classmates and a reflection on how the layers of the Internet make use of abstraction.

This lesson is a capstone to the Internet unit. Students will research and prepare a flash talk about an issue facing society: either **[v Net Neutrality]** or **Internet Censorship**. Developing an informed opinion about these issues hinges on an understanding of how the Internet functions as a system. Students will prepare and deliver a flash talk that should combine forming an opinion about the issue and an exhibition of their knowledge of the internet.

This lesson is good *practice* for certain elements of the AP Explore Performance Task.1 The primary things practiced here are: doing a bit of research about impacts of computing (though here it’s specifically about the Internet), explaining some technical details related to ideas in computer science, and connecting these ideas to global and social impacts. Students will practice synthesizing information, and presenting their learning in a flash talk.

1**Note:** This is NOT the official AP® Performance Task that will be submitted as part of the Advanced Placement exam; it is a practice activity intended to prepare students for some portions of their individual performance at a later time.

Welcome to Computer Science Principles! The first lesson is about getting students excited about the course and connecting their own personal interests to computer science. Students are asked to share something they know a lot about and teach it to a small group. Groups make a “rapid” prototype of an innovative idea and share it. Students watch a brief video about computing innovations. The lesson ends with students logging into the Code.org CSP course web site, and answering a brief prompt about what “computer science” means to them.

In this lesson students work in groups using classroom supplies and everyday objects to develop their own systems for encoding and sending simple binary messages, messages that only have two possible values. Students will think about what can be usefully conveyed in such a simple message and build a “device” to communicate the message over some physical distance.
Then students are asked to consider how to use their binary messaging devices to send a more complex message - a message with more than two possibilities, say four, or eight, or even thousands of different messages. Students will collaborate in an iterative design process in the “maker ethos” of rapidly building and improving their “device” for sending messages.

In this lesson, students will be introduced to how bits are transmitted over the most common mediums (copper wire, fiber-optic cable, and radio waves) used to connect devices on the Internet. They then chose a device that transmits bits and research that device and the system it uses. Students create a poster presenting their findings, and the lesson concludes with a gallery walk of the posters.

Students are introduced to the Internet Simulator, a tool they will return to many times in the first two units of the course. Today, the Internet Simulator will be used to simulate a single shared wire, connecting two people. The wire can only be in one of two possible states (state A or state B) and either partner may set or read the state of the wire at any time, but this is the only way in which students may communicate. Students must invent a binary call-response [v protocol] using this system. Coordination, speed and timing are problems that need to be solved. At the conclusion of the lesson, students compete to demonstrate the speed and accuracy of their protocols, and calculate the [v bit rate] of their message exchange.

Students will explore the properties of number systems by effectively inventing a base-3 number system using circles, triangles and squares as the symbols instead of arabic numerals. Students are asked to create rules that explain how each arrangement of symbols can be generated or predicated as an orderly, logical series. The objective is to understand that you can represent *any* number with any agreed-upon set of symbols that appear in an agreed-upon order. This is as true for circles, triangle and squares as it is for the digits 0-9, or the number systems we commonly see in computer science (binary and hexadecimal).

In this lesson, students will gain more familiarity with binary numbers. The lesson will transition away from the number systems that students created in the the circle-triangle-square activity, and begin to focus on representing numeric values using the binary number system. Though students have communicated with binary before, developing a *number system* is a little different. Previously, students mapped patterns of binary values to a small set of fixed messages. A number system is infinite, and also has rules for counting - or how to get from one value to the next.

In this lesson, students explore some fascinating stories from the news and history (and the future) about number encodings in computers. These stories should serve to illuminate how the kinds of decisions students have been making about number encodings are the same kinds of things that real scientists in the world have to worry about, sometimes with disastrous consequences. While this lesson has the possibility of running long, it is meant only as a short excursion into real-world application and should be limited to one class period.

In this lesson students will return to the Internet Simulator in order to send a simple line drawing to a classmate. Students will be presented a grid on which they will draw an image (connecting 3-7 dots with straight lines). They must develop a protocol which will allow them to send any image they might create on their grids, paying particular attention to how many bits are used to represent each binary number. Students will therefore have additional practice encoding and decoding binary numbers and develop further intuitions about the properties of binary numbers in a hands-on way. The lesson concludes by testing protocols using a teacher-supplied test-image to transmit.

In this lesson, students create their own system for representing text in binary and explore how their newfound ability to convert between binary and decimal numbers helps in this process. In the warm up students quickly create a system for representing the 50 states in binary. They then move to the main activity where they create a system for representing text using only numbers while communicating on the Internet Simulator. At the end of the main activity they briefly review the ASCII system. The wrap up discussion introduces the concept of abstraction and its connection to the chapter. Following this lesson there is a chapter assessment that reviews the contents of this and the previous lessons.

This lesson sets the the stage for why we want to learn about how the Internet works. First students share what they currently know about how the Internet works through a KWL activity.

Then students watch a short video the introduces Vint Cerf and the Internet at high level. Students then skim a memo written to the Internet Engineering Task Force (IETF) by Vint Cerf in 2002 entitled “The Internet is for Everyone,” which calls out a series of threats to the prospect that the Internet should be an open, easily and cheaply accessible resource for everyone on the planet.

Finally we foreshadow the practice PT at the end of the unit. Many of the questions and challenges raised by Vint Cerf still apply today, and students will be asked to research and present on one for the Practice PT.

In this lesson, students explore more deeply how communication between multiple computers can work over the Internet. They do this by playing a simplified game of Battleship, in which the first game is played unplugged, in their table groups, and the second game is played using the Internet Simulator, so that multiple students can connect to each other and see each other’s messages. Students must devise a messaging protocol that makes it clear who is sending the message and who the intended recipient is.

Students then devise a *binary protocol* for playing this game which will entail developing an addressing system for players, as a well as a formal packet structure for transmitting data about the state of the game.

**NOTE**: this is a large lesson that will likely need to span 2 days of class.